Best Selling Products

Pylontech US5000-1C 4.8kWh Li-Ion Solar Battery 48V To view our full range of Pylontech batteries visit our collection page here.  Please note that US2000/C, US3000/C & US5000-1C are all compatible with each other. US5000 Datasheet US5000 Installation Manual US5000 Warranty US5000 Compatibility Sheet Connecting cables included as standard Pylontech US5000-1C 48V Lithium Battery – High-Capacity Modular Energy Storage The Pylontech US5000-1C is a 48V high-performance lithium battery from the US series, engineered for UK residential and commercial energy storage systems. With modular design, high usable capacity, and intelligent battery management, this unit provides efficient, safe, and scalable energy storage for solar PV and hybrid inverter setups. Key Features Modular & Expandable Design Modular system allows parallel connection of up to 16 units Supports large installations up to 72.96kWh without the need for an LV Hub Simplifies system expansion and reduces the number of required modules High Usable Capacity & Performance Usable capacity: 4,560 Wh with 95% Depth of Discharge (DoD) High energy density reduces the number of modules needed for desired capacity Long cycle life ensures reliable performance over years of use Intelligent Battery Management System (BMS) Protects against abnormal temperature, current, voltage, and state of charge (SoC) Compatible with RS485 and CAN communication protocols Optimises safety and efficiency for connected systems Compatibility & Installation Compatible with tier 1 inverter brands in the UK market Standard 7-year warranty, extendable to 10 years by registering online Warranty valid only if installed by a qualified electrician or authorised installer Technical Specifications Supplier Part No: US5000-1C Weight: 38 kg Battery Type: Lithium Ion Nominal Energy: 4,800 Wh Depth of Discharge: 95% Voltage: 48 V Continuous Discharge Rate (Normal Use): 2,400 W Maximum Discharge Rate (5 Minutes): 4,800 W Surge Discharge Rate (15 Seconds): 5,808 W Maximum Charge Rate (5 Minutes): 4,800 W Why Choose the Pylontech US5000-1C? High-capacity modular battery for scalable energy storage Intelligent BMS ensures safe and stable operation Reduced module count thanks to higher usable capacity Compatible with UK hybrid inverters and solar PV systems Extended warranty options for peace of mind ✅ Invest in the Pylontech US5000-1C 48V battery for a reliable, high-performance, and scalable energy storage solution designed for UK homes and commercial properties. To extend the warranty you have to register here: http://en.pylontech.com.cn/service/support

Sunsynk ECCO 3.6Kw Hybrid Inverter solar & wind Inverter #2: SUN-3.6-ECCO Storage Systems - Hybrid Inverter Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk 3.6Kw Warranty Sunsynk 3.6Kw G99 Certificate To view our full range of Sunsynk products visit our main Sunsynk page here SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter Take control of your energy with the SunSynk 3.6kW AC ECCO Hybrid Inverter, a next-generation super hybrid system designed for efficiency, flexibility, and smart energy management. Compatible with Lithium-ion and Lead Acid batteries, this inverter integrates seamlessly with Octopus Agile, Flux, and Go for real-time energy optimisation. Key Features High Efficiency Hybrid Inverter: Rated AC output of 3.68kW with a 7kW MPPT, ideal for generating energy even during winter months Dual MPPT Design: Maximises energy harvest from solar arrays Battery Compatibility: Supports up to 50kWh of connected Lithium-ion or Lead Acid batteries Advanced Grid Integration: Fully programmable power export with automatic switching between Grid-Tied and Off-Grid mode Scalable System: Up to 16 units can be paralleled with the same firmware for larger installations IP65 Rated & Anti-Islanding Protection: Ensures durability and safety in all conditions Euro Efficiency: 99.9% for maximum energy utilisation Technical Specifications Rated Power: 3,600 W Min MPPT Voltage: 125 V | Max MPPT Voltage: 500 V DC Startup Voltage: 150 V | DC Shutdown Voltage: 125 V Max Input Voltage: 500 V | Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W | Surge AC Power (1 Second): 5,400 W Max DC Current: 22 A | Max DC Inputs: 2 Connector: MC4 | Integrated DC Switch: Yes MPPT Quantity: 2 | Transformer: None Warranty: 5 years Sunsynk App & Data Logger Remote Control: Change all inverter settings from anywhere in the world Real-Time Monitoring: Monitor energy production, consumption, and battery status instantly Push Notifications: Receive alerts for power cuts, generator use, or battery activity Live Stats & Reporting: Access detailed energy statistics, generate custom reports, and track savings Octopus Agile & Flux Integration: Charge batteries at the cheapest rates and discharge when electricity prices are high, optimising savings Start using the Sunsynk Logger app via the Apple App Store or Google Play Store. Why Choose the SunSynk 3.6kW ECCO Hybrid Inverter? Optimises energy production for both self-consumption and export Advanced safety features and programmable settings Supports smart grid integration for cost savings Scalable and flexible for residential or commercial installations

KETO Battery Disconnector with 200A Fuses #2: KETO-1-200A Storage Systems KETO-1 Fuse-Switch-Disconnector Kit – Battery Isolator Ensure robust and safe battery disconnection with the KETO range from Jean Müller, renowned for precision and user safety in electrical installations. Ideal for hybrid, solar, and energy storage systems, this kit delivers secure isolation for high-current DC setups. Kit Includes: 1 × KETO-1 Fuse-Switch-Disconnector Body – Size 1, DIN rail mountable 2 × N1015205 200A NH Fuse Links – Compatible with KETO 1 Key Features: High DC Capacity: Maximum DC current 250A, rated for up to 440V DC Flexible Cable Terminals: M10 lugs support cable areas from 25–150mm² Compact & Durable: Overall width 184mm, system size 300mm User Safety: Provides reliable battery isolation for maintenance or emergency shutdown Easy Installation: DIN rail mountable for secure and professional setup The KETO-1 Fuse-Switch-Disconnector Kit is a reliable, high-quality solution for isolating batteries in solar, hybrid, and other DC-powered systems, combining safety, efficiency, and convenience in one package.

Growatt ShineWiLan-X2 – WiFi / LAN / Bluetooth Datalogger 3: 6691 1: GROWATT-ShineWiLan-X2   Growatt ShineWiLan-X2 – WiFi / LAN / Bluetooth Datalogger for X, XH, X2 & SPH-UP Inverters The Growatt ShineWiLan-X2 is a compact, all-in-one communication module designed for seamless monitoring of Growatt PV and hybrid inverters. With integrated WiFi, LAN and Bluetooth in a single device, it offers flexible connectivity options, streamlined installation and robust long-term performance. Compatible with any Growatt inverter equipped with a USB port, the ShineWiLan-X2 enables real-time monitoring, remote maintenance and advanced diagnostics through the Growatt Smart Energy platform. Three-in-One Communication Design The ShineWiLan-X2 combines multiple communication functions into a single datalogger: Integrated WiFi, LAN and Bluetooth modules Automatic device recognition for quick configuration Supports both residential and small-commercial monitoring setups Designed for fast connection to Growatt inverters via USB This unified design reduces hardware costs and simplifies system communication architecture. Plug-and-Play Installation The module offers a highly user-friendly setup process: Plug-and-play via standard LAN connection Bluetooth-supported local configuration Automatic online registration for remote access Ideal for quick installation or retrofit upgrades With less time spent on commissioning, installers can optimise workflow efficiency across multiple sites. Intelligent Monitoring & Maintenance The ShineWiLan-X2 enables comprehensive cloud-based and local monitoring: Online system monitoring through ShinePhone or ShineServer Real-time alerts and remote troubleshooting Automatic uptime reporting and performance analysis Convenient local firmware upgrade function This ensures reliable long-term oversight, reduces service callouts and supports accurate performance evaluation. Built-In Local Data Storage The integrated memory module stores up to one month of operational data, ensuring no performance loss during temporary network outages. Once reconnected, all logged data synchronises automatically to the Growatt monitoring platform.

Fogstar Energy 48V 16.1kWh ECO White Battery (2026 Version)  #12: Fog/Sep/16kw/BL/V2 Fogstar 16.1kWh ECO Datasheet *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes: 1.5m CAN & RS485 communication for smooth integration. 1.5m 50mm battery cable terminated with M8 ring lugs ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh. Technical Specifications Specification Details Rated Energy 16.1kWh Cell Configuration 1P16S Cell Type 3.2V 314Ah Grade A LiFePO₄ Nominal Voltage 51.2V Operating Voltage Range 42V – 58.2V Capacity 314Ah Cycle Life 8000 cycles @ 25°C, 50A (91% DOD) Charge Temperature -10°C to 40°C Discharge Temperature -20°C to 40°C Rated Charge Current 100A Rated Discharge Current 200A Maximum Discharge Current 200A Battery Management System Seplos 200A BMS Active Balancer JK 2A Weight 119.5kg ±3kg Dimensions (mm) 898.5 (H) × 415 (L) × 260 (W) Communication CAN & RS485 Pre-Loaded Protocols Victron, Sofar, Pylontech, Growatt, Solis, Goodwe Warranty 6 Years Customer Support 10 Years Ideal For • Residential solar + battery retrofits• New build solar installations• Off-grid and hybrid systems• Small commercial energy storage• Installations in cold garages or outbuildings• Projects requiring scalable storage capacity Why Buy From ITS Technologies? At ITS Technologies, we specialise in supplying reliable, installer-friendly solar and battery solutions across the UK. Our team understands system design, inverter compatibility, and DNO requirements — so you can purchase with confidence. Need help designing your system? Speak to our technical team today.

Fogstar Energy 48V 16.1kWh ECO Black Battery (2026 Version)  #12: Fog/Sep/16kw/BL/V2 Fogstar 16.1kWh ECO Datasheet *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes: 1.5m CAN & RS485 communication for smooth integration. 1.5m 50mm battery cable terminated with M8 ring lugs ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh. Technical Specifications Specification Details Rated Energy 16.1kWh Cell Configuration 1P16S Cell Type 3.2V 314Ah Grade A LiFePO₄ Nominal Voltage 51.2V Operating Voltage Range 42V – 58.2V Capacity 314Ah Cycle Life 8000 cycles @ 25°C, 50A (91% DOD) Charge Temperature -10°C to 40°C Discharge Temperature -20°C to 40°C Rated Charge Current 100A Rated Discharge Current 200A Maximum Discharge Current 200A Battery Management System Seplos 200A BMS Active Balancer JK 2A Weight 119.5kg ±3kg Dimensions (mm) 898.5 (H) × 415 (L) × 260 (W) Communication CAN & RS485 Pre-Loaded Protocols Victron, Sofar, Pylontech, Growatt, Solis, Goodwe Warranty 6 Years Customer Support 10 Years Ideal For • Residential solar + battery retrofits• New build solar installations• Off-grid and hybrid systems• Small commercial energy storage• Installations in cold garages or outbuildings• Projects requiring scalable storage capacity Why Buy From ITS Technologies? At ITS Technologies, we specialise in supplying reliable, installer-friendly solar and battery solutions across the UK. Our team understands system design, inverter compatibility, and DNO requirements — so you can purchase with confidence. Need help designing your system? Speak to our technical team today.

455W Trina Vertex S+ Dual Glass  Black Frame Solar Panel #3: 6777 #4: TSM-455NEG9R.28 455W Trina Data Sheet 455W Trina Warranty Minimum Order: 1 Explore Our Full Solar Panel RangeBrowse our complete collection of high-performance solar panels [here]. Available for supply only or with professional installation. For a tailored system designed around your home and energy needs, simply complete our bespoke quote form [here]. Trina Vertex S+ 455W N-Type Dual-Glass Solar Panel The Trina Vertex S+ 455W solar panel is Trina’s first N-Type module, released in 2022. Built with a dual-glass design, it delivers superior durability, enhanced light-trapping, and long-lasting performance – making it an excellent choice for both residential and commercial & industrial (C&I) solar systems in the UK. With a high efficiency of 22.8%, wide system compatibility, and a robust 25-year product warranty plus 30-year power warranty, the Vertex S+ is designed for those who want a reliable, future-proof solar solution. Why Choose Trina Vertex S+? Universal Compatibility Works seamlessly with most mainstream inverters, optimisers, and mounting systems Suitable for residential rooftops and C&I projects High Reliability and Performance Dual-glass construction for stronger protection against harsh UK weather Enhanced light trapping for higher energy yield N-Type cell technology for lower degradation and longer lifespan Key Features Released in 2022 – Trina’s first N-Type dual-glass panel Rated Power Output: 455W High Efficiency: 22.8% 25-Year Product Warranty & 30-Year Power Warranty Universal design for flexible installations Proven durability with dual-glass protection   Warranty Product Warranty: 25 Years Performance Warranty: 30 Years Ideal Applications Residential Installations The compact size and universal compatibility make the Vertex S+ a perfect fit for UK homes, offering maximum efficiency even on smaller rooftops. Commercial & Industrial Projects Engineered for scalability and reliability, this panel is ideal for C&I installations where long-term performance and durability are essential.   Documents 455W Trina Data Sheet 455W Trina Warranty Specifications Technical Specifications General Specs Model: Trina Vertex S+ 455W Panel Type: N-Type Monocrystalline Dual-Glass Weight: 21.1 kg Dimensions: 1,762 × 1,134 × 30 mm Efficiency: 22.8%

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Plus S6 Hybrid Data Sheet  Solis Plus 8-10kW Hybrid Data Sheet Fogstar 16.1kWh ECO Datasheet Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT.   Solis 3.6/5/6/8/10kW Hybrid PLUS AI Optimised Inverter with UK based Fogstar Energy ECO 16.1kWh Battery  Solis extended warranty available here The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring 8 MPPT's, FAST UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity AI Optimised cloud-based, automated energy management assistant Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features Fogstar Energy 48V 16.1kWh ECO Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes CAN & RS485 communication for smooth integration. ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh.   Includes SOL-METER-1PH-EASTRON 

Fox AC 5.0kW Charger Inverter #1: FE-AC1-5.0 Storage Systems - Charger-Inverter Fox 5.0kW Data Sheet Fox 5.0kW Inverter User Manual Fox 5.0kw Inverter Warranty Fox 5.0kw Inverter G100 Certificate   Fox AC Charger Inverter  – Efficient & Expandable The Fox charger is designed for seamless integration into your solar setup. With a user-friendly installation process, this system reduces installation time and provides reliable energy management. Remote monitoring is available via your smartphone or the web portal, giving you full control and visibility wherever you are. Key Features Battery Compatibility: Works with Fox HV2600 and Cube batteries Durable & Weatherproof: IP65 rating makes it suitable for outdoor installation Remote Monitoring: Access via smartphone app or web portal Scalable Solution: Easily expand battery capacity as your energy needs grow Dual MPPT: Ensures optimal solar generation and system performance High Efficiency: Round-trip efficiency of up to 97% Safety First: Requires BMS unit and a minimum of 2 x HV2600 batteries Accessories Included: Comes with CT Clamp for monitoring grid import/export  

Solis S5 WiFi Stick – Smart Monitoring for Solis Inverters 2: SOL-S5-WIFI-4P Solis Data Logging Stick Datasheet Datalogger Compatability The Solis S5 WiFi Stick provides a fast, secure connection between your inverter and SolisCloud, giving you real-time system data, performance tracking, and remote control from any device. With plug-and-play installation and support for both 2.4GHz and 5GHz networks, it’s the simplest way to keep your solar system connected and running at peak efficiency. Reliable, Real-Time Monitoring The device transmits live system information directly to SolisCloud, allowing homeowners, installers, and O&M teams to check performance, view historical generation, and diagnose issues remotely. Easy Setup & Smart Compatibility Compatible with Solis 5G hybrid inverters. Just plug the WiFi stick into the 4-pin COM port on your Solis inverter, connect to your local Wi-Fi network, and the system begins reporting instantly. Key Features Works with both 2.4GHz and 5GHz Wi-Fi networks LED status indicators for quick system diagnostics Simple plug-and-play installation Real-time data transfer to SolisCloud with reset/pairing button IP65 weatherproof rating for indoor or outdoor use Compatible with all Solis inverters using a 4-pin communication (COM) port

Fox Cube HV ECS2900 V2 2.88kWh Slave battery Connector Type A #2: FE-HV-ECS-2900-4A2C  #3: 6001 Fox ECS2900 Datasheet Fox ECS2900 Manual Fox ECS2900 Warranty If purchasing to add to an existing system please check if you have V2 with A connector batteries on your existing system. How to check if you have Type A or B TYPE A BATTERIES Serial Number Prefix 60JM292 / KM292 / 8M292 / QM292 TYPE B BATTERIES Serial Number Prefix 60CM292 / TM292 Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximize Economy 7 essential information to work out which battery storage options is best for you please visit - Understanding Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page   Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers. 2.88kWh Capacity Scalable to 20.16kWh 90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage   Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

Solis Data Logging Stick - Wi-Fi & LAN 4-Pin #2: SOL-S2-WL-ST  Solis Data Logging Stick Wi-Fi & LAN Datasheet Datalogger Compatability Solis 4-Pin Data Logger – Wi-Fi & LAN Web Interface for Inverters The Solis 4-Pin Data Logger is a 2-in-1 datalogger designed to provide fast, reliable, and convenient data collection for Solis inverters. Supporting both Wi-Fi and LAN communication, it ensures stable real-time monitoring and seamless integration with Solis Cloud. With its plug-and-play design, LED indicators, and one-key reset function, this web interface offers a simple yet powerful way to manage and monitor your solar energy system. Only compatible with Solis inverters with a 4-pin port. To check which datalogger is compatible with your Solis inverter, see this link. 🔑 Key Features Dual Connectivity – Supports both Wi-Fi and LAN for flexible communication Seamless Solis Cloud Integration – Reliable data upload and monitoring Plug & Play Setup – Easy installation with fast configuration Real-Time Monitoring – Fault alarms and instant updates for improved system management User-Friendly Design – LED indicators for power, network, and inverter communication Convenient Debugging – One-key reset button for quick troubleshooting Reliable Warranty – 2-year standard Solis accessory warranty ⚙️ Specifications Model: SOL-S2-WL-ST Connectivity: Wi-Fi or LAN Indicators: LED status lights for Power, Network, and Inverter Communication Interface: 4-pin COM port connector Additional Functions: Fault alarms, reset button Warranty: 2 years ⚡The Solis Data Logging Stick WiFi & LAN is the perfect solution for ensuring reliable communication, efficient monitoring, and simplified system management for your Solis inverter.

Fox HV BMS - Required for AC & Hybrid chargers #1: FE-HV-BMS Storage Systems - Li-ion Battery Pack Fox HV BMS V1 – Battery Management System for HV2600 Batteries Part No: FE-HV-BMS | Category: Storage Systems – Communication Module 🔋 Essential Battery Management for Fox HV2600 (V1) The Fox HV BMS V1 is a high-voltage battery management system designed exclusively for use with Fox V1 HV2600 batteries. One BMS is required per battery stack, ensuring safe operation, effective communication, and long-term reliability of your Fox Energy storage system. ⚠️ Important Compatibility Note: This BMS is only compatible with V1 HV2600 batteries and is not required for Fox AIO (All-in-One) units. It is mandatory for Fox AC Charger and Hybrid inverter systems. ⚡ Key Features ✔️ 1 BMS required per battery stack ✔️ Supports minimum of 2 HV2600 batteries per stack ✔️ Ensures safe operation and system communication ✔️ For use with AC Charger & Hybrid models only ✔️ Compact, reliable design for easy installation 📦 Technical Details Model: Fox HV BMS V1 Compatible Batteries: Fox V1 HV2600 only Application: Required for AC Charger & Hybrid systems (not AIO) Minimum Battery Stack: 2 x HV2600 ✅ Why Choose the Fox HV BMS V1? Guarantees optimal performance and long-term reliability Provides secure system communication between batteries and inverters Specifically engineered for Fox Energy V1 HV2600 storage solutions

460W DMEGC  N-Type Mono-Facial Double Glass Solar Panel #6: DM460G12RT-G48HBB  DMEGC 460w Data Sheet DMEGC 460w Warrnty DMEGC 460w Fire Safety   Minimum Order: 6 DMEGC 460W N-Type TOPCon Double Glass Full Black Solar Panel Part No: DM460G12RT-G48HBBCategory: Panels – Double Glass The DMEGC 460W N-Type TOPCon Double Glass Full Black Solar Panel is a premium high-efficiency PV module engineered for residential and commercial rooftop installations. Featuring advanced N-Type TOPCon monocrystalline cell technology, a durable double-glass construction and an elegant full black design, this module delivers outstanding energy production, long-term reliability and exceptional aesthetics. With a module efficiency of 23%, the panel provides excellent power generation while offering improved performance in low-light conditions and enhanced resistance to environmental degradation. Combined with DMEGC's fully traceable manufacturing process and internationally recognised certifications, this module is an excellent choice for installers seeking dependable, high-performance solar technology. Advanced N-Type TOPCon Technology The latest N-Type TOPCon cells provide greater efficiency and improved long-term performance compared to conventional P-Type modules. Key performance benefits include: High 460W power output 23% module efficiency Reduced Light Induced Degradation (LID) Excellent low-light performance during cloudy conditions, dawn and dusk Improved temperature performance for increased annual energy yield Stable long-term power generation These features help maximise energy production while lowering the overall Levelised Cost of Energy (LCOE). Double Glass Construction for Maximum Durability The robust double-glass design provides enhanced protection against harsh environmental conditions while improving the module's structural integrity. Durability advantages include: Improved resistance to moisture ingress Increased protection against micro-cracks Excellent resistance to UV exposure High resistance to salt mist and ammonia Strong mechanical load capability for demanding environments The double-glass construction contributes to a longer operational lifespan and greater long-term reliability. Premium Full Black Design Designed with appearance in mind, the full black finish delivers a sleek, uniform look that complements modern residential rooftops without compromising performance. Ideal for: Residential rooftop installations Premium architectural projects Commercial buildings requiring an attractive solar solution Certified Quality & Reliability DMEGC Solar maintains one of the industry's most transparent manufacturing processes with a fully traceable supply chain and comprehensive international certifications. Highlights include: Fully traceable manufacturing Class A fire rating ISO certified manufacturing IEC certified performance TÜV certified quality standards Strong financial stability supported by a low debt-to-asset ratio These credentials provide confidence in the long-term quality and reliability of every module. Electrical Specifications Peak Power: 460W Module Efficiency: 23% Cell Type: N-Type TOPCon Monocrystalline Module Design: Monofacial Double Glass Operating Temperature: -40°C to +85°C Mechanical Specifications Dimensions: 1762 × 1134 × 30mm Weight: 24kg Finish: Full Black Application: Residential & Commercial Rooftop PV Systems Long-Term Warranty DMEGC Solar modules are designed for dependable long-term performance and are backed by comprehensive manufacturer warranties. 25-Year Product Warranty 30-Year Linear Power Output Warranty Why Choose the DMEGC 460W N-Type TOPCon Solar Panel? High-efficiency 460W output with 23% module efficiency Advanced N-Type TOPCon cell technology Durable double-glass construction Premium full black aesthetic Excellent low-light performance High resistance to PID, salt mist and ammonia Fully traceable manufacturing 25-year product warranty and 30-year linear performance warranty Ideal for residential and commercial solar installations This premium DMEGC module combines cutting-edge N-Type technology, outstanding durability and an elegant full black finish, making it an excellent choice for installers and homeowners seeking maximum long-term performance and visual appeal.

Sigenergy Sigenstor 10 Battery 9.04kWh  #22:    SIG-STOR-BAT-10.0-LED   - Battery Pack Sigenergy Sigenstor Brochure Sigenergy Sigenstor Battery Datasheet Sigenergy SigenStor Battery User Manual  Sigenergy mySigen Installer Manual Sigenergy SigenStor Battery Warranty  To view our full Sigenergy collection page click here For a bespoke quote complete our quote form here Sigenergy Sigenstor 9.04kWh Battery – Smart Energy Storage for UK Homes & Businesses The Sigenergy Sigenstor 9.04kWh Battery is a next-generation energy storage solution designed to help UK homeowners and businesses maximise solar power, reduce electricity bills, and enjoy reliable backup during outages. With safe lithium iron phosphate (LFP) technology, this modular system delivers long-lasting performance, safety, and flexibility for future energy needs. ⚡ Key Benefits 9.04kWh usable storage capacity – perfect for medium to large households or small businesses Save on bills – store solar power during the day and use it when tariffs peak Backup protection – keep essential appliances running during power cuts Modular & scalable – expand capacity by stacking additional units Weatherproof durability – IP65 enclosure for reliable indoor and outdoor use 📊 Intelligent LED Display The built-in LED status interface makes energy management simple: Monitor charging & discharging activity in real time Check storage levels instantly Track system health without specialist tools 🔒 Safety & Reliability Designed for UK conditions, the Sigenstor offers: Over-voltage, over-current & overheating protection IP65 dust and water resistance Durable build quality for year-round performance 🛠 Technical Specifications Usable Energy: 8,060Wh Depth of Discharge (DoD): 96.7% Voltage: 600V Weight: 78kg Continuous Discharge Power: 4,000W Max Discharge (5 min): 6,000W Surge Discharge (15s): 6,000W Max Charge Rate (5 min): 6,000W ✅ Why Choose the Sigenergy Sigenstor 9.04kWh? Lower electricity bills with smart solar energy storage Achieve greater energy independence Future-proof design with modular expansion Peace of mind with safe, proven LFP battery technology

Dyness Powerbox G2 10.24kWh LV LFP Battery #2: DY-POWERBOXG2 Storage Systems - Li-ion Battery Pack   Dyness PowerBox G2 Datasheet Dyness PowerBox G2 User Manual Dyness Compatibility List Dyness PowerBox G2 Warranty To view complete Dyness full range please visit our Dyness main page Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg Slim Design: 16.5 cm width for tight installation spaces  

Sunsynk ACURE 8Kw On & Off grid Hybrid solar & wind Inverter WiFi Included  #5/20/22: SUNSYNK SUNC2−8.0LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Optimise energy usage with programmable wireless smart switches Expandable System – Connect up to 10 wireless smart switches for tailored load control Integrated 40A Smart Switch – Reliable power distribution built-in Advanced Connectivity – Built-in Bluetooth, Wi-Fi, LAN (Ethernet), and LoRa Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

Fox ESS EP12 Plus 11.52kWh Battery with Heating Element & Fire Suppressant  #3: 7430 #2: FE-HV-EP12-H  FOX EP12 Data Sheet FOX EP12 User Manual FOX ESS EP12 Installation Guide FOX Warranty (Confirmed to be compatible with previous EP11 model) Future-proof your energy storage with the Fox ESS EP12 Plus – a durable, high-performance LFP battery designed for residential and commercial energy systems. Scalable Lithium Iron Phosphate Battery for Hybrid & AC Systems The Fox ESS EP12 Plus is a high-voltage lithium iron phosphate (LFP) battery with a nominal capacity of 11.52kWh. Designed for long-lasting, scalable energy storage, it can be expanded up to 46.08kWh (per inverter port) using the Fox ESS 4-way junction box. With built-in self-heating technology, the EP12 Plus ensures optimal performance even in extreme cold. This makes it a perfect choice for UK homes and businesses looking for efficient year-round energy storage. It integrates seamlessly with Fox ESS’s full range of single-phase (1ph) and three-phase (3ph) hybrid and AC inverters, delivering reliable energy for self-consumption, backup power, or EV charging support. Key Features 11.52kWh Nominal Capacity Expandable to 46.08kWh per inverter port (4 units in parallel) >95% Round-Trip Efficiency Integrated Self-Heating for low-temperature environments IP65-Rated – suitable for indoor & outdoor installation 10-Year Manufacturer Warranty Technical Specifications Battery Type: LFP (LiFePO₄) Nominal Energy: 11.52kWh Operating Voltage: 348V – 438V Max Charge Current: 30 A Max Discharge Current: 30 A Depth of Discharge: 90% Round-Trip Efficiency: >95% Scalability: Max 4 units in parallel Weight: 98kg  Dimensions: 710 x 640 x 185mm IP Rating: IP65 Operating Temp: -25°C to 55°C Inverter Compatibility - Works Seamlessly With: Fox ESS 1-Phase Hybrid Inverters Fox ESS 3-Phase Hybrid Inverters Fox ESS AC-Coupled Inverters  Ideal For: Solar energy storage (on-grid & off-grid) Residential battery backup systems Commercial & agricultural energy systems EV charging energy reserves Power backup during outages What’s in the Box? 1x Fox ESS EP12 Plus Battery (11.52kWh) Installation guide & user manual Mounting hardware (if applicable) Warranty & registration documents Why Choose the EP12 Plus? The Fox ESS EP12 Plus is engineered for long-term energy independence, high performance, and reliable scalability. Whether you're starting a new solar installation or upgrading an existing setup, it’s a smart investment backed by industry-leading technology and support.

Fogstar Energy 16.1-64.4kWh 51.2V Modular Battery Stack  #12: Fog/En/Stack Fogstar Battery stack Datasheet *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products Scalable Commercial LiFePO₄ Energy Storage | IP65 | Integrated Heating & Fire Suppression The Fogstar Energy Modular Battery Stack is a high-capacity, low-voltage (51.2V) LiFePO₄ energy storage system designed for residential, commercial and light industrial applications. Built from 1-4 X 16.1kWh battery modules, and managed by a single top-mounted control unit that operates the system as one fully integrated solution. System Overview Each stack consists of: • 16.1kWh LiFePO₄ battery modules• Integrated top-mounted control unit• Heavy-duty base plate structure• Built-in 350A isolation breaker Once assembled, the control unit manages all modules as one unified battery system — simplifying commissioning, inverter communication, monitoring and servicing. The modular architecture allows additional stacks to be added at any time, making this solution ideal for phased commercial installs or growing energy demand.   Advanced Integrated BMS A high-performance Battery Management System delivers: • Precise charge & discharge control• Full protection against over/under voltage & temperature• Support for high-power inverter systems• Long-term reliability and system stability Seamless Inverter Integration CAN & RS485 communication enables compatibility with leading inverter brands including: • Victron• LuxPower• Sunsynk• Solis• Voltronic• Voltacon Ideal for hybrid, backup and off-grid applications. Fully Scalable Architecture • 1 × battery = 16.1kWh• Multiple stacks connected in parallel• Scales up to 1.23MWh total capacity Perfect for commercial properties, agricultural sites, workshops, warehouses and large residential installs. IP65-Rated Construction A robust, sealed enclosure protects against dust and moisture, allowing: • Indoor installation• Plant room installation• Outdoor installation (where suitable) Built for real-world environments. Integrated Fire Suppression Heat-activated aerosol fire suppression system provides: • Automatic internal protection• No external maintenance requirements• Enhanced site safety compliance Cold-Weather Ready (Down to –15°C) Integrated battery heating enables: • Safe low-temperature charging• Reliable winter operation• Installation in unheated plant rooms and outbuildings Operating conditions:• Charge: 0–45°C (with heating enabled)• Discharge: –20–45°C JK 2A Active Cell Balancing Continuous active balancing improves: • Cell voltage equalisation• System efficiency• Long-term lifespan• Performance stability under load High Output Performance • 51.2V (48V nominal) low-voltage system• 300A maximum charge & discharge current• Designed to support high-demand inverters• Ideal for backup, peak shaving & off-grid applications Built-In 350A Breaker Integrated breaker allows full system isolation for: • Maintenance• Fault conditions• Emergency shutdown Warranty & Support • 6-Year Manufacturer Warranty• 10 Years UK-Based Customer Support Technical Specifications Specification Details Model FE51.2 Rated Energy16.1 16.1kWh Nominal Voltage 51.2V Operating Voltage Range 43.2V – 57.6V Cycle Life 8,000 cycles @ 91% DOD Max Discharge Current 300A Max Charge Current 300A Working Temperature (Charge) 0–45°C (with heating) Working Temperature (Discharge) –20–45°C Ingress Protection IP65 Communication CAN / RS485 What’s Included The system is supplied with: ✔ Pre-Terminated 95mm² Battery Power Cables Heavy-duty, high-current cables supplied ready terminated for fast installation. Allows: • Direct battery-to-inverter connection• Connection via external DC busbar (where required) ✔ Amphenol-Terminated Battery Interconnect Cables • Secure locking connectors• Low-resistance current transfer• Reliable parallel stack expansion ✔ 1.5m Communication Cable Enables: • CAN / RS485 communication• Inverter control• System monitoring integration Installation Guidance The supplied 95mm² power cables are compatible with most inverter systems. In some installations: • Battery cables may be routed to a DC busbar• Manufacturer-supplied inverter leads may be used for final inverter connection

AIKO Neostar 3P+ 490W N-Type ABC Dual-Glass Solar Panel – Gen 3 2: AIK-A-MCE54-490-BF-DG-G3  Aiko 490W 3P+ Datasheet Minimum order for this panel: 6 panels. For orders with no minimum please visit our Single Panels page. Explore Our Full Solar Panel RangeBrowse our complete collection of high-performance solar panels [here]. Available for supply only or with professional installation. For a tailored system designed around your home and energy needs, simply complete our bespoke quote form [here]. AIKO Neostar 3P+ 490W N-Type ABC Dual-Glass Solar Panel – Gen 3 The AIKO Neostar 3P+ 490W is a third-generation, ultra-high-efficiency solar panel designed for premium residential rooftop installations where maximum output and refined aesthetics are essential. Built on AIKO’s advanced N-Type ABC (All Back Contact) cell technology, this 54-cell dual-glass module achieves an outstanding 24.5% efficiency, placing it among the most efficient panels available on the market. Its black-frame, busbar-free design delivers a clean architectural finish while maximising the active light-absorbing surface of each cell for superior real-world performance. Advanced ABC Cell Technology AIKO’s All Back Contact technology relocates all electrical contacts to the rear of the cell, eliminating front-side shading losses and improving current flow. This results in higher efficiency, improved low-light response, and enhanced reliability over the system lifetime. Key technology benefits include: Increased active cell area for higher energy yield Reduced resistive losses for improved efficiency Cell-level partial shading optimisation (unique in the industry) Clean, uniform appearance with no visible busbars Third-Generation Performance & Reliability The Neostar 3P+ Gen 3 range introduces further refinements over previous generations, delivering higher output, improved safety and long-term durability. Performance and reliability enhancements include: 490W peak power output 24.5% module efficiency (up to 24.8% across the 465–495W range) Improved temperature coefficient of -0.26%/°C, tested by CEA PV Tech High-temperature limitation for enhanced fire safety Excellent resistance to micro-cracks for long-term mechanical stability Electrical Performance Peak Power: 490W Module Efficiency: 24.5% Maximum System Voltage: 1500V DC These characteristics ensure excellent compatibility with modern high-voltage inverters and optimisers while maximising power density on limited roof space. Mechanical Design & Installation Dimensions: 1762 × 1134 mm Cell Configuration: 54-cell, N-Type ABC Construction: Dual-glass Frame: Black aluminium frame Cable Length: 1.2 m Connector Type: Stäubli MC4 EVO2 The dual-glass construction enhances durability and environmental resistance, while the compact 54-cell format simplifies handling and installation on residential rooftops. Industry Recognition & Design Excellence The AIKO Neostar platform has received multiple international awards, reflecting both technical leadership and sustainable manufacturing practices: Intersolar Innovation Award 2023 Red Dot Design Award 2023 ESG Transparency Award 2024 Long-Term Warranties 15-year product warranty 30-year performance warranty These warranties provide strong assurance of long-term output stability and investment protection. Product Information Product Code: AIK-A-MCE54-490-BF-DG-G3 Alternate Codes: AIKO-A490-MCE54Dw / AIKO-A-MCE54Dw Series: Neostar 3P+ Technology: N-Type ABC, Dual-Glass Application: Residential rooftop PV

EcoFlow PowerOcean 5kWh expansion battery EcoFlow Brochure 1ph EcoFlow Datasheet 1ph EcoFlow User Manual 1ph EcoFlow Installation Manual 1ph Full range of kits available here Installed packages available here EcoFlow PowerOcean Home Energy Storage Overview The EcoFlow PowerOcean sets a new standard for residential energy storage, combining advanced LFP battery technology, robust fire prevention features, and a durable IP65-certified design. Built to last and expand, it offers flexibility for both single-phase and three-phase installations while providing over 6,000 charge cycles and a 15-year warranty. Key Features 15-year industry-leading warranty for long-term peace of mind Instant cell-level anti-fire protection for enhanced safety Built-in heating pads ensure optimal performance in sub-zero temperatures IP65-rated: resistant to dust ingress and low-pressure water jets 95% Depth of Discharge (D.O.D) for maximum usable energy Expandable battery capacity: up to 15kWh (1ph) & 45kWh (3ph) per inverter Parallel expansion: supports up to 2 inverters in parallel Individual BMS: ensures optimal battery performance and compatibility with newer models Advanced monitoring: industry-leading mobile app with API for Octopus Agile & Flux tariffs Sleek, compact design suitable for modern homes UK-based technical support Specifications Battery Type: Lithium Iron Phosphate (LFP) Efficiency: High-efficiency battery output Charge Cycles: >6,000 Operating Temperature: Equipped with heating pads for sub-zero operation Scalability: Single-phase: 15kWh, Three-phase: 45kWh, expandable via parallel inverters Connectivity: Smart monitoring via EcoFlow App with tariff-based charging integration Protection Rating: IP65 The EcoFlow PowerOcean combines safety, scalability, and reliability, making it a future-proof investment for homeowners who want to maximize solar self-consumption and ensure uninterrupted power.  

 Duracell solar battery Dura5 IP65 5.12kW LiFePO4 Battery #5: PD-5KWH-50V-2G-IP65 Duracell5 Data Sheet   *Please note that Dura5 batteries are not compatible with Dura5+ or Puredrive batteries. Cables included for connecting to Hybrid inverter and for battery to battery.  For a complete system with the right hybrid inverter for you please visit the Duracell page Duracell Energy Dura5 5.12kWh Battery Storage System ⚠️ Compatibility notice:Dura5 batteries are not compatible with Dura5+ or Puredrive battery systems. The Duracell Energy Dura5 5.12kWh battery is a high-performance, modular home energy storage solution designed to maximise self-consumption, reduce energy bills, and deliver a strong return on investment. Combining Duracell’s proven battery technology with a powerful smart app, the Dura5 offers fast charging, long service life, and intelligent energy management, making it ideal for modern solar and battery installations. Flexible Installation Options The Dura5 battery can be installed: Wall mounted Floor standing Its sleek, compact design allows for discreet indoor installation while maintaining excellent performance and accessibility. Modular & Scalable Design With a simple modular format, you can: Add additional batteries at any time Expand your system to up to 32 batteries Increase capacity as your energy needs grow This flexibility makes the Dura5 a future-proof solution for homeowners looking to increase energy independence over time. Smart Energy Management Using the Duracell Energy smart app, you can: Monitor battery performance in real time Manage solar generation, battery storage, and EV charging Optimise savings with time-of-use energy tariffs Control all compatible Duracell Energy products from one interface What’s Included Power cables for battery-to-battery connection Cables for connection to a hybrid inverter Battery-to-battery communication cable Cable length: 1.7 metres

Sigenergy Power Sensor Single Phase CT DH for UK #2:   SIG-SENSOR-SP-CT-DH  |  Storage Systems | Storage Energy Meter Sigenergy Home Energy Solution Brochure Sigenergy Power Sensor Datasheet Sigenergy Power Sensor Warranty  To view our full Sigenergy collection page click here For a bespoke quote complete our quote form here Intelligent Energy Monitoring for Homes & Businesses The Sigenergy Power Sensor Single Phase External CT DH is a high-precision energy monitoring solution designed to work seamlessly with the Sigenergy SigenStor ecosystem. Built with advanced technology, it ensures accurate power detection, real-time monitoring, and full compatibility with other Sigenergy devices—making it the ideal choice for smarter, more efficient energy management. Key Benefits High-Accuracy Power Detection Achieve 1% high-accuracy power measurement, ensuring precise control of your home or business energy usage. Real-Time Data Display Stay informed with the built-in LCD screen for real-time operational insights. Seamless Compatibility This sensor integrates smoothly with Sigenergy devices without the need for complex configuration. Reliable & Future-Proof With 100ms data refresh rates and AI-ready technology, the sensor guarantees instant, intelligent energy monitoring. Technical Specifications Product Name: Sigenergy Power Sensor Single Phase External CT DH Part No: SIG-SENSOR-SP-CT-DH Type: Storage Systems – Storage Energy Meter Accuracy: 1% high-accuracy power detection Display: LCD real-time info display Connection: Top class 100 A direct connection with built-in CT Data Refresh Rate: 100 ms (instantaneous feed) Integration: Export/import limitation support, AI evolving ready Compatibility: Fully compatible with Sigenergy SigenStor and ecosystem devices  Why buy the Sigenergy Power Sensor Single Phase External CT DH High Accuracy: 1% precision power detection for reliable performance. Seamless Integration: Works flawlessly with Sigenergy devices—no manual setup required. Real-Time Insights: LCD display provides instant monitoring and operational updates. AI Ready: Supports export/import limitations and is prepared for evolving smart energy applications.

Sunsynk W5.3 Battery Module 5.32kWh Battery Wall Mounted or rack mounted IP65 suited for colder conditions #5: SUNSYNK-W5.3 (Compatible with G5.3, L5.3 & Lifelynk) Sunsynk W5.3 Data Sheet Sunsynk W5.3 Manual To view our full range of Sunsynk products visit our main Sunsynk page here Sunynk battery mix compatibility  Sunsynk W5.3 IP65 Battery – Reliable Solar Energy Storage for UK Homes & Businesses At ITS Technologies, we specialise in professional solar and battery storage installations across the UK. Our featured Sunsynk W5.3 Battery delivers safe, efficient, and durable energy storage, ideal for residential and commercial projects. ⚡ Why Choose the Sunsynk W5.3? Available in 5.32kWh and 10.64kWh capacities, the W5.3 offers versatility for a range of energy storage needs. Built with LiFePO4 (lithium iron phosphate) technology, it ensures: Enhanced safety compared to traditional lithium batteries Long cycle life for dependable performance High energy efficiency for maximum ROI Extreme temperature operation: charges down to -10°C, discharges down to -20°C 🔧 Key Features LiFePO4 battery chemistry – safe, durable, and long-lasting Integrated 125A double-pole MCB for reliable safety IP65-rated – suitable for indoor or outdoor use Scalable system – connect up to 32 batteries in parallel 90% Depth of Discharge (DoD) for optimal usable capacity Optional cell-level monitoring for advanced performance tracking Flexible installation – wall-mounted or rack-mounted Supplied with battery-to-battery and battery-to-inverter cables ✅ Why Work With ITS Technologies? Partnering with ITS Technologies guarantees: Expert UK-wide installation Fully compliant, high-quality setup Tailored solutions for domestic and commercial energy needs Ongoing support for maintenance and optimisation The Sunsynk W5.3 is perfect for those looking to cut electricity bills, increase energy independence, and enhance sustainability. Trust ITS Technologies to install and support this advanced energy storage system.

Jinko Tiger Neo 3.0 470W All Black Dual Glass N-Type Solar Panel  #3:  8028   Panels - Double Glass Jinko 470W Datasheet Jinko 470W Manual Jinko 470W MCS Minimum Order: 1 Explore Our Full Solar Panel RangeBrowse our complete collection of high-performance solar panels [here]. Available for supply only or with professional installation. For a tailored system designed around your home and energy needs, simply complete our bespoke quote form [here]. Jinko Tiger Neo N-Type Solar Panel – High-Efficiency, Long-Life Module The Jinko Tiger Neo 3.0 470W All Black Dual Glass N-Type Solar Panel (JKM470N-48QL6-DB) combines premium aesthetics with industry-leading performance, making it an excellent choice for residential and commercial solar installations. Featuring advanced N-Type TOPCon cell technology, this high-efficiency solar panel delivers superior energy generation, outstanding low-light performance, and enhanced long-term reliability. With an impressive 23.52% module efficiency, the Jinko Tiger Neo 470W maximises power output from available roof space while maintaining a sleek all-black appearance that complements modern properties. The robust dual-glass construction improves durability, weather resistance, and long-term energy production, helping homeowners and installers achieve greater returns on their solar investment. Key Features High-power output of 470W Advanced N-Type TOPCon Technology Outstanding 23.52% Efficiency Premium All Black Design Enhanced Dual Glass Construction Excellent Low-Light Performance Improved Resistance to Degradation Reduced Temperature Losses Optimised Cell Layout for Maximum Sunlight Capture Suitable for Residential and Commercial Installations Superior N-Type TOPCon Performance The Jinko Tiger Neo 3.0 range utilises the latest N-Type TOPCon solar cell technology, delivering higher efficiency and increased energy yields compared to conventional P-Type modules. These advanced cells provide excellent performance in challenging weather conditions, including cloudy skies and low-light environments, ensuring reliable energy generation throughout the year. The optimised cell architecture maximises sunlight absorption while reducing power losses, helping homeowners and businesses generate more electricity from every square metre of roof space. Enhanced Durability with Dual Glass Technology Built with premium dual-glass construction, the Jinko Tiger Neo 470W offers superior protection against environmental stresses such as moisture, temperature fluctuations, UV exposure, and mechanical loading. This design enhances long-term reliability and contributes to lower degradation rates over the lifetime of the module. The dual-glass structure also improves resistance to micro-cracks and potential induced degradation (PID), helping maintain strong performance for decades. Industry-Leading Warranty Protection Jinko Solar backs the Tiger Neo 3.0 series with one of the strongest warranty packages available in the solar industry. 25-Year Product Warranty 30-Year Linear Power Warranty Only 1% degradation during the first year Exceptional long-term power retention Enhanced resistance to light-induced and temperature-induced degradation Technical Specifications Electrical Performance Specification Value Peak Power (Pmax) 470W Maximum Power Voltage (Vmpp) 30.97V Open Circuit Voltage (Voc) 36.19V Maximum Power Current (Impp) 15.18A Short Circuit Current (Isc) 15.80A Module Efficiency 23.52% Mechanical Specifications Specification Value Product Code JKM470N-48QL6-DB Weight 24.4kg Dimensions 1762 x 1134 x 30mm Cell Technology N-Type TOPCon Mono Module Design All Black Dual Glass Ideal Applications The Jinko Tiger Neo 3.0 470W All Black Solar Panel is ideal for: Residential rooftop solar systems Commercial solar installations New-build developments Premium aesthetic solar projects High-efficiency roof space optimisation Battery storage and hybrid inverter systems Why Choose the Jinko Tiger Neo 470W? The Jinko Tiger Neo 3.0 470W All Black Dual Glass Solar Panel delivers the perfect combination of efficiency, durability, aesthetics, and long-term reliability. With advanced N-Type TOPCon technology, outstanding 23.52% efficiency, and industry-leading warranty protection, it is one of the most attractive solar panel options for installers, homeowners, and commercial developers seeking maximum energy production and long-term value.

Fogstar Energy IP65-Rated 16.1kWh 48V Solar Battery #12:Fog/En/IP/16/48V Fogstar 16.1kWh IP65 Datasheet *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products Fogstar Energy 16.1kWh IP65 Solar Battery (48V LiFePO4) ⚡ High-Capacity Outdoor Battery Storage for UK Homes & Businesses The Fogstar Energy 16.1kWh IP65 Solar Battery is a premium, high-capacity 48V LiFePO4 battery system engineered for UK residential and commercial energy storage. Designed to operate reliably in harsh environments, this battery combines advanced safety features, intelligent thermal control, and wide inverter compatibility—making it one of the most versatile solar batteries available in the UK market. Perfect for off-grid systems, solar PV storage, and time-of-use energy optimisation, the Fogstar 16.1kWh battery delivers long lifespan, high performance, and exceptional value. ✅ Key Benefits 🔥 Built-in Fire Suppression System – Automatic aerosol fire protection for enhanced safety 🌧️ IP65 Rated (Indoor & Outdoor Use) – Fully sealed against dust and water ❄️ Integrated Heating System – Operates down to -20°C with charging from 0°C 🔌 Plug & Play Inverter Compatibility – Works with Victron, Solis, Growatt, Sofar, Goodwe & Pylontech 🔋 16.1kWh High Capacity – Ideal for homes with high energy usage or commercial systems 🔁 Up to 8,000 Cycles – Long lifespan with Grade A EVE LiFePO4 cells 📈 Expandable System – Connect up to 15 batteries in parallel ⚡ Integrated 250A DC Breaker – Built-in protection for safe operation 🧠 Smart Touchscreen Display – Real-time monitoring & protocol selection ⚙️ Active Cell Balancing (2A JK Balancer) – Maximises performance & lifespan 🏡 Built for UK Conditions The Fogstar Energy battery is specifically engineered to perform in UK climates, where temperature fluctuations and outdoor installations are common. Its automatic heating system ensures reliable operation in winter, while the IP65-rated enclosure protects against rain, dust, and environmental exposure—making it ideal for garages, outbuildings, and external wall installations. 🔥 Advanced Safety as Standard Safety is a major differentiator for Fogstar: Integrated aerosol fire suppression system High-quality LiFePO4 chemistry (safer than lithium-ion alternatives) Built-in DC breaker for fault protection Active balancing for cell stability This makes it one of the safest home battery systems available in the UK today. ⚡ Inverter Compatibility (Plug & Play) The integrated PACE BMS includes pre-configured communication protocols for: Victron Solis Growatt Sofar Goodwe Pylontech-compatible systems No software downloads required—simply select your inverter via the LCD touchscreen. 📈 Scalable Energy Storage System Start with a single 16.1kWh unit and expand as needed: 🔗 Up to 15 batteries in parallel Ideal for: Large residential properties Commercial buildings Farms & off-grid applications 🛠️ Simple Installation Supplied with M8 ring terminals & protective covers Integrated wheels for easier handling (140kg unit) Compact footprint for flexible installation locations 📊 Technical Specifications Specification Details Battery Capacity 16.1kWh (16,076.8Wh) Nominal Voltage 51.2V Capacity 314Ah Cell Type EVE MB31 Grade A LiFePO4 Configuration 16S1P Cycle Life 8,000 cycles @ 80% DOD (95% DOD from Feb 2026) BMS PACE 200A Max Discharge Current 200A Balancer 2A JK Active Balancer DC Protection 250A Integrated Breaker Ingress Protection IP65 Operating Temperature Down to -20°C Weight 140kg Dimensions (mm) 500 (W) x 230 (D) x 830 (H) Display 4.3" TFT LCD Touchscreen Warranty 10 Years

Growatt Shine Link X wireless monitoring kit #2: GROWATT-SHINE-LAN-X 3: 3611 Growatt Shine Lan X Data Sheet  Growatt Shine Lan X Installation Manual Growatt ShineLAN-X Dongle The Growatt ShineLAN-X dongle provides a reliable hardwired connection for Growatt inverters, offering a simple alternative to the Growatt ShineLink-X. Designed for seamless communication, it connects directly into your customer’s router via RJ45 cable or can be paired with Power Line Adaptors in areas where standard WiFi dongles are not effective. Compatible with the X, MIC-X, XE and XH range of Growatt inverters, the ShineLAN-X ensures secure monitoring and stable data transfer. 🔑 Key Features Plug-and-Play Setup – Easy and quick commissioning process Stable Data Transfer – Direct connection to router via RJ45 cable Flexible Use – Works with Power Line Adaptors where WiFi signal is weak Remote Updates – Supports remote inverter firmware upgrades Free Monitoring – Access performance data via the Shine Server platform ✅ The Growatt ShineLAN-X dongle is the ideal choice when you need a robust, wired monitoring solution for Growatt inverters.

Trina Vertex S+ 465W Dual Glass Black Frame N-Type Solar Panel (TSM-465NEG9R.28)  465W Trina Data Sheet  465W Trina Manual  465W Trina Warranty Minimum Order: 1 The Trina Vertex S+ 465W Dual Glass N-Type Solar Panel combines cutting-edge technology, exceptional efficiency, and long-term reliability, making it an ideal solution for residential and commercial solar installations. Featuring advanced N-Type i-TOPCon cell technology, this premium solar module delivers higher energy yields, improved low-light performance, and enhanced durability compared to conventional solar panels. With an impressive 23.3% module efficiency, the Trina Vertex S+ 465W maximises power generation from available roof space while maintaining a sleek black frame design. Its lightweight dual-glass construction provides superior protection against environmental stress, helping to reduce microcracks, improve longevity, and maintain high performance throughout the life of the system. Key Features High Power Output of 465W Advanced N-Type i-TOPCon Technology Exceptional 23.3% Module Efficiency Lightweight Dual Glass Design Enhanced Resistance to Microcracks and Scratches Excellent Low-Light Performance Reduced Annual Degradation of Just 0.4% Improved Energy Yield and Long-Term Reliability Black Frame Aesthetic for Modern Installations Ideal for Residential and Commercial Solar Projects Advanced N-Type i-TOPCon Technology The Trina Vertex S+ range utilises Trina Solar's innovative i-TOPCon cell technology, designed to maximise energy production and improve overall system performance. By enhancing rear-side reflection and reducing contact resistance, the panel achieves higher conversion efficiencies and increased power output across a wide range of operating conditions. This advanced technology also delivers superior performance during cloudy weather, early mornings, and late afternoons, ensuring more consistent energy generation throughout the day. Durable Dual Glass Construction The Vertex S+ 465W features a lightweight dual-glass design that provides exceptional durability without compromising ease of installation. The dual-glass structure offers increased resistance to: Microcracks Mechanical stress Moisture ingress UV degradation Environmental wear and tear This robust design helps maintain long-term performance and reliability, particularly in challenging weather conditions. Industry-Leading Warranty Protection Thanks to the superior stability of N-Type technology, the Trina Vertex S+ benefits from extremely low degradation rates and outstanding long-term energy production. 25-Year Product Warranty 30-Year Power Output Warranty Only 0.4% Annual Power Degradation Enhanced resistance to Light-Induced Degradation (LID) Improved long-term performance retention Technical Specifications Electrical Performance Specification Value Peak Power (Pmax) 465W Maximum Power Voltage (Vmpp) 45.8V Open Circuit Voltage (Voc) 54.2V Maximum Power Current (Impp) 10.16A Short Circuit Current (Isc) 10.85A Module Efficiency 23.3% Mechanical Specifications Specification Value Product Code TSM-465NEG9R.28 Weight 21kg Dimensions 1762 × 1134 × 30mm Cell Technology N-Type Mono i-TOPCon Module Construction Dual Glass Frame Colour Black Frame Ideal Applications The Trina Vertex S+ 465W Solar Panel is ideal for: Residential rooftop solar systems Commercial solar installations New-build developments Battery storage and hybrid inverter systems Roofs with limited installation space Projects requiring premium aesthetics and maximum efficiency Why Choose the Trina Vertex S+ 465W? The Trina Vertex S+ 465W Dual Glass N-Type Solar Panel offers a powerful combination of high efficiency, exceptional durability, and long-term performance. Featuring advanced i-TOPCon technology, industry-leading warranty coverage, and lightweight dual-glass construction, it is an excellent choice for installers, homeowners, and commercial developers looking to maximise solar generation and long-term return on investment.

Longi 475W Hi-MO X10 EcoLife Back Contact Half Cell All Black  #6: LR7-54HVB-475M  Panels - Monocrystallines Longi Solar 475W Datasheet Longi Solar 475W Installation Manual Longi Solar 475W Warranty Minimum order for this panel: 6 panels. For orders with no minimum please visit our Single Panels page. Explore Our Full Solar Panel RangeBrowse our complete collection of high-performance solar panels [here]. Available for supply only or with professional installation. For a tailored system designed around your home and energy needs, simply complete our bespoke quote form [here]. 🖤 LONGi 475W Hi-MO X10 Artist HPBC Half-Cell All Black Solar Panel (LR7-54HVB-475M) Part No: LR7-54HVB-475MBrand: LONGi SolarPanel Type: Monocrystalline | HPBC Half-Cell | Back Contact | Full Black DesignEfficiency: 23.3% | Power Output: 475W ☀️ Product Overview The LONGi Hi-MO X10 Artist 475W Solar Panel delivers exceptional performance with sleek, modern aesthetics. Using Hybrid Passivated Back Contact (HPBC) technology, this next-generation panel achieves industry-leading efficiency up to 24.5% and minimal power loss over time — making it one of the most advanced solar modules available in the UK. Designed with a seamless all-black finish, the LR7-54HVB-475M is the ideal choice for residential rooftops and high-end solar installations where design, performance, and longevity are key. 🌟 Key Features ⚡ Revolutionary HPBC Technology Hybrid Passivated Back Contact (HPBC) design for maximum power generation and improved low-light performance. Busbar-free surface ensures a clean, all-black appearance while enhancing energy absorption. Achieves up to 24.5% module efficiency with 475–500W output range. 🖤 Premium All-Black Aesthetic Elegant full black design ideal for modern UK homes. No visible busbars for a seamless, minimalistic look. 🌞 High Efficiency & Reliability 23.3% real-world efficiency with minimal degradation (<1.5% in year one). 0.40% annual degradation from years 2–25 ensures consistent long-term performance. Superior shading tolerance and enhanced crack resistance for improved reliability. 🧱 Built to Withstand the Elements High resistance to micro-cracks, salt mist, and ammonia. Improved temperature coefficient (-0.26%/°C) ensures steady performance in hot conditions. High temperature restriction enhances fire safety and long-term durability. 🏆 Award-Winning Innovation Winner of the 2021 Intersolar Award. Recognised as an RETC High Achiever four years running. 🕒 Long-Term Warranty Protection 25-Year Product Warranty 30-Year Performance Warranty for guaranteed energy output and peace of mind ⚙️ Technical Specifications Specification Value Rated Power (Pmax) 475 W Module Efficiency 23.3% Cell Technology HPBC (Hybrid Passivated Back Contact) Dimensions (L x W x D) 1,800 mm x 1,134 mm x 30 mm Weight 21.6 kg VMPP 33.16 V IMPP 14.33 A Isc 15.03 A Voc 40.18 V Temperature Coefficient (Pmax) -0.26 %/°C Connector Type MC4 EVO4 Clamp Position Long Side Only Pallet Size Oversized 🏡 Ideal For Residential rooftop installations Premium architectural projects Aesthetic solar system designs requiring an elegant full-black finish 🌍 Why Choose LONGi Hi-MO X10 Artist Panels? LONGi continues to redefine solar innovation with the Hi-MO X10 Artist series — combining cutting-edge HPBC back contact technology with award-winning performance and durability. Trusted by professionals worldwide, LONGi panels are engineered for high efficiency, low degradation, and long-term reliability — making them a smart investment for UK homeowners and installers alike.

Sigenergy Sigenstor Ground-Mount Kit with Adjustable Feet #2:   SIG-STOR-GM-KIT-ALF  |  Storage Systems | Ground Mount Bracket Sigenergy Home Energy Solution Brochure To view our full Sigenergy collection page click here For a bespoke quote complete our quote form here Reliable Installation for Your SigenStor Energy Storage System The Sigenergy Sigenstor Installation Kit for Ground-Mount with Adjustable Leveler Feet provides a safe, durable, and flexible mounting solution for your SigenStor all-in-one solar energy storage system. Designed for simple installation and long-lasting stability, this kit ensures your system is securely installed on the ground, even on uneven surfaces. Sigenergy continues to lead the way in innovative home energy solutions, with the SigenStor offering a unique 5-in-One modular design that integrates: Solar Inverter EV DC Charger Battery PCS Battery Pack Energy Management System (EMS) This ground-mount installation kit perfectly complements the SigenStor system, ensuring both performance and safety in residential and commercial applications. Key Benefits Adjustable Leveler Feet – Provides flexibility to securely mount on uneven surfaces. Robust Construction – Built with high-quality materials to ensure long-term durability. Ease of Installation – Streamlined design for quick and efficient setup. Enhanced Stability – Keeps your SigenStor system firmly in place, even in challenging environments. Technical Specifications Product Name: Sigenergy Sigenstor Installation kit for Wall-Mount  Part No:  SIG-STOR-GM-KIT-ALF Type: Storage Systems – Ground Mount Bracket Weight: 10.2kg Compatibility: Sigenergy SigenStor Energy Storage System Material:  Heavy duty corrosion resistant steel Adjustability: Leveler feet for uneven surfaces  Why choose this Sigenergy Wall Mount Kit? Compatible with all Sigenergy SigenStor modular energy systems. Ensures maximum safety and structural integrity. Provides a professional and neat installation finish. Designed to withstand outdoor conditions for long-lasting reliability. Stable, Safe, and Simple – the ideal installation solution for your Sigenergy SigenStor. Whether you are installing a residential solar energy storage system or a commercial energy solution, this ground-mount kit with adjustable feet provides the flexibility and reliability you need.

Fox 10.5kW K Series Single Phase Hybrid Inverter #2: FE-KH1-10.5 Storage Systems - Hybrid Inverter Fox 10.5kW Datasheet Fox 10.5kW Manual Fox 10.5kW Warranty Fox 10.5kW G100 Certificate   FoxESS K Series 10kW Single Phase Hybrid Inverter Harness the full potential of your solar energy system with the FoxESS K Series 10kW single-phase hybrid inverter. Designed for efficiency and flexibility, this IP65-rated inverter is ideal for indoor or outdoor installations and works seamlessly with high-voltage batteries for maximum round-trip efficiency. Key Features Stylish and Robust Design: IP65-rated enclosure suitable for outdoor environments. High Efficiency: High-voltage battery compatibility ensures up to 97.4% round-trip efficiency. Remote Monitoring & Control: Access and control your system easily via FoxESS Cloud. Easy Installation: Lightweight design at 29kg, saving time and effort on-site. Battery Compatibility: Works with Cube & EP batteries. Zero Export Control: CT clamp included for safe and compliant energy management. Technical Specifications Specification Value Weight 29 kg Rated Power 10,500 W Minimum PPT Voltage 80 V Maximum PPT Voltage 500 V DC Startup Voltage 75 V DC Shutdown Voltage 601 V Maximum Input Voltage 600 V Maximum DC Power 15,000 W Maximum AC Power (5 min) 10,000 W Surge AC Power (1 sec) 10,500 W Maximum DC Current 64 A Max DC Inputs 4 DC Fuses 0 Connector MC4 Included Connectors 8 Euro Efficiency 97.4 % Transformer None MPPT Quantity 4 Integrated DC Switch Yes Why Choose the FoxESS K Series? The FoxESS K Series combines sleek design, reliable performance, and advanced technology to give you complete control over your solar energy. Its high-efficiency performance and flexible battery compatibility make it an excellent choice for homeowners looking to optimise their solar storage and energy management. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.

Sunsynk 3ph 12K Hybrid Inverter solar & wind Inverter #2: SUN-12.0-3PH Sunsynk 3ph Data Sheet Sunsynk 3ph Manual To view our full range of Sunsynk products visit our main Sunsynk page here Sunsynk Three-Phase Hybrid Storage Inverter Installation The Sunsynk Three-Phase Hybrid Storage Inverters are advanced power management solutions designed for three-phase grid applications. Perfect for commercial and large residential systems, these inverters efficiently control power flow from multiple sources — including solar panels, the main electrical grid, and backup generators — while intelligently storing and delivering electricity where it’s needed most. Unique Phase Balancing Technology Unlike other inverters in their class, Sunsynk three-phase hybrids feature automatic load balancing. This means that even if your loads are unevenly distributed — for example, 20% on one phase, 20% on another, and 60% on the third — the inverter will still maintain perfect phase rotation. This ensures stability, efficiency, and uninterrupted performance. Technical Highlights Max. AC Input Power: 13,200W Max. PV Input Power: 15,600W Max. AC Output Power: 13,200W Battery Discharge Power: 12,000W Max. Discharge Current: 240A Frequency droop control Up to 4 inverters in parallel Interactive display with RS485 & Wi-Fi 5-Year Warranty Product Features Flexible & Efficient Design Dual MPPT for optimised solar generation Compatible with most Lithium-ion and Lead Acid batteries Automatic switching from Grid-Tied to Off-Grid mode Zero-export function for compliance with local grid rules Smart Load Management Dedicated outputs for Essential and Non-Essential Loads Seamlessly integrates with EV chargers and energy storage systems Built for Durability IP65 weatherproof rating for outdoor and indoor installations High build quality designed for long-term reliability Easy Monitoring & Control Comes with Wi-Fi logger and CT clamp included Compatible with the SolarMan App and the Sunsynk Logger App Full Control with the Sunsynk App Take charge of your system with the Sunsynk Logger App (available on iOS, Android, or www.sunsynk.net). Remote Access & Notifications Instant push notifications for power cuts, generator switching, or battery use Change inverter settings remotely from anywhere with an internet connection Advanced Monitoring Real-time system updates and inverter performance Live stats and detailed reporting on solar generation, battery usage, and grid interaction Generate custom reports and graphs to track energy savings Octopus Integration Fully compatible with Octopus Agile, Flux & Go tariffs Automatically charge batteries at off-peak prices and discharge when rates are high Maximise return on investment with smart tariff optimisation Installation Note ⚠️ Installer Notice: Sunsynk recommends 120mm cable size from isolator to inverter for safe and efficient operation.

Fox H1 6.0kW Hybrid Inverter G2   #2: FE-H1-6.0-G2 Storage Systems - Hybrid Inverter #3: 5985 Fox H1 6.0kW Datasheet Fox H1 6.0kW Manual Fox H1 6.0kW Installer Guide Fox H1 6.0kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   Fox Hybrid Single-Phase AC Inverter – Expandable Solar Energy Solution The Fox Hybrid Single-Phase AC Inverter combines high efficiency, flexible expansion, and smart monitoring to optimise your solar energy system. Compatible with Cube & EP5/11 batteries, this inverter is perfect for residential and small commercial installations. Key Features Easy Installation Quick and straightforward setup for hassle-free integration. High Voltage & Dual MPPT Dual MPPT design ensures maximum solar energy production. High round-trip efficiency of 97% maximises energy savings. Remote Monitoring Monitor your system in real-time via Wi-Fi for performance tracking and updates. Durable & Weatherproof IP65-rated for indoor and outdoor installation. What’s Included CT Clamps Wi-Fi Stick Additional Requirements Second CT clamp for additional generator sets (PV, wind, or others). Energy meter between inverter and incoming power connection if the distance exceeds 30m. Technical Specifications Weight: 23 kg Rated Power: 6,000 W Minimum MPPT Voltage: 80 V Maximum MPPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Maximum Input Voltage: 600 V Max DC Power (5 minutes): 9,000 W Max AC Power (5 minutes): 6,000 W Surge AC Power (1 second): 6,600 W Maximum DC Current: 32 A Maximum DC Inputs: 2 Connector Type: MC4 (4 included) Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years Why Choose the Fox Hybrid Inverter? The Fox Hybrid Single-Phase AC Inverter delivers reliable, efficient, and scalable solar power management. Its high voltage design, dual MPPT, and remote monitoring capabilities make it an ideal choice for homeowners and businesses looking to expand their solar energy systems while maximising efficiency and savings. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Sunsynk W Series 10.64kWh Battery IP65 Wall Mounted Integrated DC Breaker #20: SUN-W-10.64kW Sunsynk W-Series 10.64kWh Data Sheet Sunsynk W-Series 10.64kWh User Manual To view our full range of Sunsynk products visit our main Sunsynk page here Sunynk battery mix compatibility  Sunsynk W-Series IP65 LiFePO4 Battery – Reliable Solar Energy Storage At ITS Technologies, we supply and install the Sunsynk W-Series IP65 LiFePO4 Battery, designed for residential and commercial solar installations. Available in 5.32kWh and 10.64kWh capacities, this battery combines performance, safety, and durability for long-lasting energy storage, even in harsh UK conditions. With a sleek black or white design, the Sunsynk W-Series battery is built to last and integrates easily into modern solar systems. Key Features & Benefits ✔ High Performance & Long Lifespan Advanced LiFePO4 cells for maximum efficiency and extended lifecycle. Supports up to 32 batteries in parallel for scalable storage solutions. 90% Depth of Discharge (DoD) for greater usable energy. ✔ Safety & Reliability Integrated 125A 4-pole MCB for enhanced circuit protection. IP65 rated for indoor or outdoor installations, resistant to dust and water. Optional cell-level monitoring for advanced system oversight. ✔ Flexible Installation Options Can be wall-mounted or rack-mounted depending on system requirements. Suitable for both single or multiple battery setups (ensure correct cabling and circuit protection). Technical Specifications Battery Details Battery Type: Lithium (LiFePO4) Capacity: 10.64kWh Voltage: 51.2V Rated Power: 5,320W Continuous Discharge Rate (Normal Use): 2,500W Depth of Discharge: 90% usable (100% total) Cycle Life: 6,000 cycles @ 90% DoD Weight: 101kg Dimensions & Warranty Dimensions (L x H x W): 610 x 760 x 200 mm Warranty: 10 years Installer Notes Ensure proper cabling and circuit protection when connecting multiple batteries. Do not mix different battery types within the same system. ⚡ Optimise your solar energy system with the Sunsynk W-Series IP65 LiFePO4 Battery – a safe, reliable, and scalable solution for long-term energy storage.

Myenergi Libbi Top Cover #3: 4951 #4: LIBBI-TP1 Myenergi Libbi Battery Top Cover Overview The top cover for the Myenergi Libbi battery is a cosmetic accessory designed to improve the visual appearance of your battery installation. It conceals exposed handles when multiple batteries are arranged in banks, providing a clean, streamlined look. Features Cosmetic Enhancement: Covers handles on battery units to give a neat, professional finish. Compatibility: Ideal for 15kW or 20kW systems arranged in two banks of two batteries. Easy Installation: Simply place on top of the battery set to hide exposed handles. Aesthetic Appeal: Creates a uniform and visually appealing battery layout. Summary While purely cosmetic, the Myenergi Libbi top cover ensures that your battery installation looks as neat as it performs, especially in larger multi-battery setups.

Trina Vertex S+ 450W Dual Glass Solar Panel – N-Type High-Efficiency Module #3: 7886  455W Trina Data Sheet  455W Trina Warranty Minimum Order: 1 Trina Vertex S+ 455W Dual Glass Full Black Solar Panel – N-Type High-Efficiency Module The Trina Vertex S+ 455W Full Black is a premium N-Type monocrystalline solar panel combining advanced dual-glass construction with a sleek, award-winning all-black aesthetic. Engineered for high efficiency, long-term reliability and modern architectural integration, it is ideally suited to residential and commercial & industrial (C&I) solar installations. Designed for compatibility with most mainstream inverters, optimisers and mounting systems, the Vertex S+ delivers strong performance, durability and visual appeal in a single high-value module. Advanced N-Type & Dual-Glass Construction The N-Type cell architecture minimises degradation and improves temperature performance, while the dual-glass design enhances structural strength and environmental resistance. Key benefits include: Increased durability in harsh weather conditions Improved light trapping for higher real-world energy yield Enhanced resistance to moisture, corrosion and mechanical stress This makes the panel highly reliable across diverse UK climates and installation environments. High Power Output & Electrical Performance Optimised for high-density installations and limited roof space, the Vertex S+ delivers: Peak Power: 455W Module Efficiency: 22.8% Vmpp: 45V Voc: 52.9V Impp: 10.11A Isc: 10.74A These electrical characteristics ensure excellent inverter compatibility and stable system operation. Full Black Design for Premium Aesthetics Developed with appearance in mind, the Vertex S+ Full Black module inherits Trina Solar’s award-winning design language. The uniform black finish blends seamlessly into modern rooftops, making it an ideal choice for visually sensitive residential and architectural projects. Mechanical Design & Installation The panel’s slim profile and manageable weight support straightforward handling and installation: Dimensions: 1762 × 1134 × 30 mm Weight: 21 kg The reinforced dual-glass structure provides long-term mechanical stability without compromising ease of installation. Long-Term Warranties & Performance Assurance Backed by Trina Solar’s industry-leading guarantees, the Vertex S+ offers exceptional peace of mind: 15-year product warranty 30-year performance warranty 0.4% annual degradation rate, enabled by N-Type technology This ensures high output retention and long-term return on investment. Product Information Product Code: TSM-450NEG9R.25 Technology: N-Type Monocrystalline Glass Type: Dual-Glass Colour: Full Black Traceability: Fully traceable module